LAN 600 (S/STP Pimf)
LAN 600 (S/STP Pimf)
Data Transmission Cable for Local Networks with Pair Wise Screening and Overall Shielding according to a Draft of Category 7
Application:
This installation cable is suitable for horizontal laying in cable ducts and conduits in telecommunications and data transmission systems. Useable for: ISDN , B-ISDN, IEEE 802.3 10 Base T Ethernet, IEEE 802.3 100 Base T Ethernet,IEEE 802.5 Token Ring, CDDI (FDDI on Cu), Gigabit-Ethernet , ATM, DQDB, Video.
Construction:
1 ..... solid bare copper, Ø 0,55 mm nebo 0,64 mm
2 ..... core insulation of foam-skin polyethylene
3 ..... pair wise shielding of plastic-laminated aluminium foil with a tinned drain wire Ø 0,4
4 ..... wide-meshed bare copper braiding
5 ..... outer sheath of polyvinylchloride (PVC) grey or halogen-free polymer compound, orange, special colours on enquiry
Standards:
EN 50288-4-1
IEC 332-1 , IEC 54-2, IEC 1034-2
IEC 708-1 (core identification)
Technical data:
Temperature range | moved | 0°C till +60°C | |
Loop impedance | [Ohm/100 m] | 14,5 | |
Capacity | max. | [nF/km] | 50 |
Nom. Velocity of propagation | NVP nom. | 77 | |
Attenuation | 1-100 MHz | [Ohm] | 100,0 +/- 25 |
Coupling resistance | 1-100 MHz | [mOhm/m] | <10 |
Capacity coupling (f=800 Hz) | K<100 | [pF/100 m] | 1500 |
Insulation resistance | [GOhm/m] | >5 | |
Test voltage at 50 Hz | [VAC] | 700 | |
Bending radius | under tension | 8,0 x Ø | |
no tension | 4,0 x Ø |
Number of pairs and nominal dimensions AWG Nr. | Copper figure kg/km | Overall diameter appr. mm | Calorific potential kWh/m | Tractive force N | Weight appr. kg/km | |||||
---|---|---|---|---|---|---|---|---|---|---|
4 x 2 x AWG 23 PVC | 44 | 7,5 | 0,17 | 190 | 68 | |||||
4 x 2 x AWG 23 FRNC | 44 | 7,5 | 0,17 | 190 | 68 | |||||
2 x(4 x 2 x AWG 23) PVC | 88 | 15,0 | 0,34 | 380 | 136 | |||||
2 x(4 x 2 x AWG 23) FRNC | 88 | 15,0 | 0,34 | 380 | 136 |