J-Y(ST)Y EIB
J-Y(ST)Y EIB
MSR Installation Cable with Static Screen European Installation Bus
Application:
The installation in, on and under the wall surface, in dry, humid and wet locations as well as outdoors (if protected) is admissible. As BUS-installation cable (EIB-installation bus) it may be used in HV and LV installations, as control and instrumentation cable (MSR-cable) in HV installations. Suitable for the transmission of measuring data, for the installation in the processing and for the application in the field of the control technology.
Y EIB.jpg){kind=small}
Construction:
1 ..... solid bare copper
2 ..... core insulation of polyvinylchloride (PVC)
3 ..... layer of plastic foil
4 ..... static screen of plastic coated aluminium foil with drain wire
5 ..... outer sheath of polyvinylchloride (PVC) green or grey
Information:
Cores twisted to starquads. (see technical attachment)
Standards:
DIN VDE 0815 (core identification)
DIN EN 60228 Class 1 (construction)
EIBA spezification
Technical data:
| Operating peak voltage Uo/U | [V] | 300 | |
| Temperature range | in motion | -5°C till +50°C | |
| one time / fixed | -30°C till +70°C | ||
| Conductor resistance | max. | [Ohm/km] | 73,2 |
| Insulation resistance | min. | [MOhm/km] | 100 |
| Mutal capacitance | at 800 Hz | [nF] max. | 100 |
| Test voltage | core / core | [KV] 5 min. | 1 |
| Core and Screen on | |||
| Conductorsurface | [KV] 1 min. | 4 | |
| Bending radius | x diameter | 15 |
| Number of pairs and nominal cross section mm2 | Copper figure kg/km | Overall diameter appr. mm | Weight appr. kg/km | |||
|---|---|---|---|---|---|---|
| 2 x 2 x 0,8 | 21 | 6,6 | 60 | |||
| allkabel s.r.o. Plzeňska 610 CZ - 338 05 Mýto v Čechách |
tel.: mobil: |
+420 371 580 686 +420 702 214 341 |
fax: email: web: |
+420 371 580 505 info@allkabel.eu www.allkabel.eu |