PVC cables

H05V-U ( Yse )

Technical data:

Nominal voltage Uo/U		[V]	300 / 500 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

For protected fixed installations inside appliances and in or on lighting fittings. Further for installations in pipes on and under plaster, however, only for signal circuit and control circuit.

H07V-U ( Ye )

Technical data:

Nominal voltage Uo/U		[V]	450 / 750 volt
Test voltage		[V]AC	2500
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Flammability	standard		EN 60332-1-2

Application:

For indoor fixed installations in dry locations, in switchboards and distributors, installed in surface mounted or embedded conduits, or on suitably objects.

H07V-R ( Ym )

Technical data:

Nominal voltage Uo/U		[V]	450 / 750 volt
Test voltage		[V]AC	2500
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

For indoor fixed installations in dry locations, in switchboards and distributors, installed in surface mounted or embedded conduits, or on suitably objects.

H05V-K ( Ysf )

Technical data:

Nominal voltage Uo/U		[V]	300 / 500 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

For protected fixed installations inside appliances and in or on lighting fittings. For installations in pipes on and under plaster, however, only for signal circuit.

H07V-K ( Yf )

Technical data:

Nominal voltage Uo/U		[V]	450 / 750 volt
Test voltage		[V]AC	2500
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

For indoor fixed installations in dry locations, in electrical equipment, switchboards and distributors. Should be installed in surface mounted or embedded conduits, for protected fixed installations in or on lighting fittings. Suitable for installations in machines for nominal voltages up to 1.000 V alternating current or up to 750 V to earth direct current. Cannot be used for installations under the wall surface.

AWG-Litzen

Technical data:

Nominal voltage Uo/U		[V]	600 volt
Test voltage		[V]AC	4000
Temperature range	in motion		+5°C till +105°C
	fixed		-15°C till +105°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Flammability	standard		EN 60332-1-2

Application:

To the internal wiring of devices, switch arrangements and machines as well as for the protected transfer in and on lights.

AYZL

Technical data:

Nominal voltage Uo/U		[V]	1000 volt
Test voltage		[V]AC	15000
Temperature range	in motion		+5°C till +70°C
Bending radius	min.	x diameter	12,5
Flammability	standard		EN 60332-1-2

Application:

In automobiles and similar systems.

NYL 5/10 KV

Technical data:

Nominal voltage Uo/U		[V]	5000 / 10000 volt
Test voltage		[V]AC	15000
Temperature range	in motion		+5°C till +70°C
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

For the use in the lighting tubes and in high voltage system which agree with EN 50107. In letter cases and relief body from metal and art out of vision, in ventilated canals without condensation water and pipes, in cable and cover strips from metal and plastic, on plaster, in dry, humid and wet rooms, as well as outside.

(N)YM

Technical data:

Nominal voltage Uo/U		[V]	300 / 500 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
	fixed		-40°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

Only for fixed installations in dry, humid and wet locations. Not suitable for laying directly open-air or in concrete.

(N)YM(ST)-J

Technical data:

Nominal voltage Uo/U		[V]	300 / 500 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Flammability	standard		EN 60332-1-2

Application:

Suitable where effective limitation of electro-magnetic interference fields is necessary, for installations in dry, humid and wet locations. Not suitable for laying directly open-air or in concrete. Not suitable in areas with explosion Hazard.

YMT

Technical data:

Nominal voltage Uo/U		[V]	300 / 500 volt
Test voltage		[V]AC	4000
Temperature range	in motion		+5°C till +70°C
	fixed		-40°C till +70°C
Operating temperature	short circuit	°C	160
Short circuit time	max.	[sec]	5
Bending radius	min.	x diameter	4
Flammability	standard		EN 60332-1-2

Application:

Usable as a self-supporting circuit on free power mains, in accordance with applicable regulation. They may not be installed directly into the ground.

(H)03VH-H (YzwL)

Technical data:

Nominal voltage Uo/U		[V]	300 / 300 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
Operating temperature	short circuit	°C	150
Short circuit time	max.	[sec]	5
Flammability	standard		EN 60332-1-2

Application:

Suitable in dry locations for connections of portable electrical appliances submitted to weak mechanical strength, like radio sets and lighting fittings, but not for heating devices.

(N)YFAZ

Technical data:

Nominal voltage Uo/U		[V]	300 / 300 volt
Test voltage		[V]AC	2000
Temperature range	in motion		+5°C till +70°C
Flammability	standard		EN 60332-1-2

Application:

Suitable in dry locations for connections of portable power consumers submitted to weak mechanical strength like light electrical hand-held equipment and in and on lighting units.