J-H(ST)Hh EIB
J-H(ST)Hh EIB
MSR Installation Cable with Static ScreenEuropean Installation BusHalogen-Free Version
Application:
For the installation on and under plaster in dry, humid and wet rooms as wellas outside (by protected installation) in Strongly and weak streamarrangements, as BUS cable as well as as a MSR cable in strong streamarrangements. The transference of measuring values, the application in theprocess data processing as well as the use in the area of the tax technologyand control technology are the main areas of application of this cable.
Construction:
1 ..... solid bare copper
2 ..... core insulation of halogen-free copolymere
3 ..... layer of plastic foil
4 ..... static screen of plastic laminated aluminium foil with drain wire
5 ..... outer sheath of halogen-free copolymere,green or grey
Information:
Cores twisted to starquads.
Standards:
DIN VDE 0815 (core identification)
DIN EN 60228 Class 1 (construction)
Specifikace EIBA
Technical data:
Operating peak voltage | [V] | 300 volt | |
Temperature range | in motion | -5°C till +50°C | |
Conductor resistance | max. | [Ohm/km] | 73,2 |
Insulation resistance | min. | [MOhm/km] | 100 |
Mutal capacitance | at 800 Hz | [nF] max. | 100 |
Test voltage | core / core | [KV] 5min. | 1 |
Core and Screen on conductorsurface | [KV] 1min. | 4 | |
Flammability | standard | EN 50266-2-4 | |
IEC 60332-1 |
Number of pairs and nominal conductor diameter (mm) | Copper figure kg/km | Overall diameter appr. mm | Calorific potential kWh/m | Weight appr. kg/km | ||||
---|---|---|---|---|---|---|---|---|
2 x 2 x 0,8 | 21 | 8,5 | 0,22 | 60 |