H07G-K (110°)
H07G-K (110°)
Rubber Insulated Single Core Wire with Increased Heat-Resistance
Application:
This wire is well suited for internal wiring in lamps, instruments, control panels and distributors in dry locations. It should be installed in surface mounted or embedded conduits.
Construction:
1 ..... fine-stranded tinned or bare copper
2 ..... core insulation of a heat resistant rubber compoun
Standards:
DIN VDE 0282 Part 7
HD 22.7 S2:1995 + A1 :1999+A2:2004
DIN EN 60228 class 5 (construction)
Technical data:
| Nominal voltage Uo/U | [V] | 450 / 750 volt | |
| Test voltage | [V]AC | 2500 | |
| Temperature range | in motion | -25°C till +110°C | |
| Operating temperature | short circuit | °C | 260 |
| Short circuit time | max. | [sec] | 5 |
| Bending radius | min. | x diameter | 7 |
| Flammability | standard | EN 60332-1-2 |
| Number of cores and nominal cross section mm2 | Colours | Copper figure kg/km | Cond. construction (appr. value) mm | Overall diameter appr. mm | Weight appr. kg/km | ||||
|---|---|---|---|---|---|---|---|---|---|
| 1,5 | sw | 15 | 30 x 0,26 | 3,4 | 25 | ||||
| 2,5 | sw | 25 | 50 x 0,26 | 4,0 | 40 | ||||
| 4,0 | sw | 40 | 56 x 0,31 | 5,0 | 60 | ||||
| 6,0 | sw | 60 | 84 x 0,31 | 5,5 | 80 | ||||
| 10,0 | sw | 100 | 80 x 0,41 | 7,0 | 125 | ||||
| 16,0 | sw | 160 | 126 x 0,41 | 8,0 | 190 | ||||
| 25,0 | sw | 250 | 196 x 0,41 | 10,0 | 292 | ||||
| 35,0 | sw | 350 | 276 x 0,41 | 11,5 | 420 | ||||
| allkabel s.r.o. Plzeňska 610 CZ - 338 05 Mýto v Čechách |
tel.: mobil: |
+420 371 580 686 +420 702 214 341 |
fax: email: web: |
+420 371 580 505 info@allkabel.eu www.allkabel.eu |
Copyright (c) 2011 All rights reserved allkabel s.r.o. Created Neutral Solution s.r.o.