H05RNH2-F
H05RNH2-F
Illumination Flat Cable
Application:
This cable is used in dry, humid and wet locations, as well as outdoors as a clamping cable for standardised lamp holders for the illumination of spaces and gardens.
Construction:
1 ..... fine-stranded tinned copper
2 ..... ethylene propylene rubber (NR) or
styrene-butadiene rubber (SBR) insulation
3 ..... polychloroprene (CR) inner sheath
4 ..... polychloroprene (CR) outer sheath, green
Standards:
DIN VDE 0282
DIN EN 60228 class 5 (construction)
HD 22.8 S2:1994+A1:1999+A2:2004
Technical data:
Nominal voltage Uo/U | [V] | 300 / 500 volt | |
Test voltage | [V]AC | 2000 | |
Temperature range | in motion | -25°C till +50°C | |
Operating temperature | short circuit | °C | 200 |
Short circuit time | max. | [sec] | 5 |
Bending radius | min. | x diameter | 6 |
Flammability | standard | EN 60332-1-2 |
Number of cores and nominal cross section mm2 | Copper figure kg/km | Cond. construction (appr. value) mm | Overall measures appr. mm | Weight appr. kg/km | ||
---|---|---|---|---|---|---|
2 x 1,5 | 30 | 30 x 0,26 | 6,0 x 14,0 | 130 | ||
2 x 2,5 | 50 | 50 x 0,26 | 6,5 x 14,5 | 145 |